Table of Contents
What are the 4 things you need to know when choosing a ladder?
Four key elements of ladder selection are: Height, Performance, Materials, and Unique Product Solutions.
- Height. A common mistake is thinking your ladder will reach higher than it does.
- Performance System. Consider job demands and load capacity.
- Materials Matter. Choose what’s best for you.
- Unique Product Solutions.
What should you do to ensure you use your ladder safely minimum 4 different points?
10 Steps to ladder safety
- Choose the right ladder for the job.
- Inspect the ladder for damage before each use.
- Only use a ladder if you are physically capable of doing so.
- Always set up the ladder on a flat, stable surface.
- Always maintain three points of contact with the ladder.
What should be inspected on a ladder?
What should you look for when inspecting any ladder?
- Missing or loose steps or rungs (they are loose if you can move them by hand)
- Damaged or worn non-slip feet.
- Loose nails, screws, bolts or nuts.
- Loose or faulty spreaders, locks and other metal parts in poor repair.
- Rot, decay or warped rails in wooden ladders.
What must be maintained if using a ladder?
If this isn’t possible then use a ladder that includes ladder safety devices like leg levellers, anti-slip gutter guards and stabilisers. Always maintain three point of contact when climbing or descending the ladder. This means two hands and one foot, or two feet and one hand.
What is a Type 1 ladder?
Type IA ladders are recommended for extra-heavy-duty industrial use. b) Type I – These ladders have a duty rating of 250 pounds. Type I ladders are manufactured for heavy-duty use. Before using any ladder, check its duty rating by looking at the sticker on the side of the ladder.
Do ladders need to be inspected?
Ladder Inspections are a vital part of using ladders safety. They should be checked before every use and regularly be a competent person every 3 to 6 months.
What do you need to know about ladder safety?
• Use approved safety gear while manipulating ladders. At a minimum, wear gloves, helmets, and steel toed shoes. • Avoid walking backward while carrying ladders. • Attempt to maintain as many points of contact with the ladder to safely complete the required task, unless you are locked in on the ladder.
What should be the condition of an extension ladder?
Ropes on extension ladders should be in good condition. If they become frayed or badly worn, replace them. DO NOT use ladders with broken or missing steps, rungs, cleats, safety feet, side rails, or other defects.
What are the three points of contact on a ladder?
It requires that when ascending or descending a ladder, employees must always maintain three points of contact by: 1 Facing the ladder 2 Using at least one hand to firmly grasp the ladder 3 Not carrying any object or load that could cause them to lose balance and fall
How to take care of a wood ladder?
Make sure wood ladders are not stored in areas where they are directly exposed to heat or dampness. Fiberglass ladders should also be kept in areas not exposed to sunlight or other ultraviolet light sources. For wooden equipment, use a clear sealer or wood preservative. Never use paint as this will conceal cracks and other defects.