Table of Contents
What is the firing order on a 318 Dodge?
Questions & Answers for: dodge 318 engine firing order …318 and 360 EnginesEngine Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Clockwise: V8-400 and 440 EnginesEngine Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Counterclockwise: V8-383 and 44 …
How many cylinders does a 318 engine have?
six
It is essentially a six-cylinder version of the 318 V8. Output was 125 hp (93 kW) and 195 lb⋅ft (264 N⋅m) until it was replaced by the Magnum 3.9 starting in 1992. In 1987 it used a two-barrel Holley carburetor and hydraulic tappets.
How do I identify my 318 Dodge engine?
Displacement Identification A quick examination of the 318 shows that the distributor is at the rear of the engine, next to the firewall. Stamped on a pad on the left front area of the engine block under the left cylinder head is “318” to identify its cubic inch displacement.
How much HP does a 318 V8 have?
The 318 (5.2 Liter V-8) The power ratings of the new LA-series 318 were exactly the same as those for the old polyspherical-head design, 230 hp and 340 lb-ft.
How do you tell if I have a 318 or 360?
There is a casting number on the side of the block behind the starter that will look something like this XXXXXXXX-318-XX. The displacement is the 3 numbers between the 2 dashes, i.e. 273, 318, 340, 360. Chances are you have a 318 since they were far from gutless, even in the ’70s. Hope this helps.
Where did the Mopar 318 engine come from?
The number “8,” for example, identifies the engine as manufactured in 1968. A “4W” identifies the 318 as assembled at the Windsor, Ontario, plant in 1974. There may be just a single letter to the left of “318,” which is the assembly plant code, or the last number in the year of the engine. The “318” also has a single letter to its right.
What kind of engine does a Chrysler 318 Magnum have?
The Chrysler 318 Magnum features a cast-iron block and two cast-iron heads with a single camshaft (OHV) and two valves per cylinder (16 valves in total). The Chrysler 3.9L Magnum engine is equipped with a multi-point fuel injection system and a mechanically timed electrical ignition system with an ignition coil and mechanical distributor.
When did Chrysler stop making the 318 engine?
In 1967, the “LA” series 318 replaced the A 318s. Chrysler manufactured the LA 318 until 2002. The 318 was the base V-8 engine in most Chrysler products, including Dodge and Plymouth. The A 318s powered the DeSoto before it ceased production in late 1960.
Where are the casting numbers on a Chrysler 318?
Casting Numbers Casting numbers of the 318 are either on the driver or passenger side of the engine block. Chrysler was not always consistent with its location. Casting numbers include a foundry casting date, which simply reads, for example, 6.6.68 for June 6, 1968.