Table of Contents
What Motors will fit in Pontiac Fiero?
You want a 2.8, 3.1 or 3.4 with cast iron heads. Any 2.8 or 3.1 from an 82 – early 90s camaro or firebird, or S10 will work, but the preferred engine is the 93-95 3.4 from the Camarobird.
What is the easiest Fiero engine swap?
The easiest engine swap is to put in another 4 cylinder Fiero engine. Next would be a 2.8 V6 Fiero motor. Then a 3.1L V6 and finally a 3.4L V6. All of those engines basically bolt up and use the stock wiring.
Can you put a V8 in a Pontiac Fiero?
Dropping a General Motors Small Block V8 into the rear of the Pontiac Fiero is a relatively easy and inexpensive way to transform the mid-engine sports car into a much more serious performance package. Unlike many used Fieros we see, this particular car’s interior has been very well maintained.
How fast is a Fiero GT?
|Model||Pontiac Fiero||Pontiac Fiero GT|
|Power||92 hp||140 hp|
|Torque||134 lbft||170 lbft|
|Weight||1170 kg||1265 kg|
|Top speed||103 mph*||125 mph*|
Can you engine swap a Fiero?
Replacement of the stock Fiero Engine with a 3800 Supercharged Engine is one of the highest levels of engine upgrade that you can perform to your Fiero. This is one of the easier engine conversions, as there are many pre-made components that allow the installation of this supercharged engine into the Fiero.
How much does it cost to LS swap a Fiero?
We’re figuring the total turnkey cost to commission your own LS Fiero at around $20k including labor.
How much horsepower does a 1986 Pontiac Fiero have?
|Power :||92 HP (67.712 KW) @ 4400 RPM|
|Torque :||132 Ft-Lbs (179 NM) @ 2800 RPM|
|Bore :||4.0 in | 102 mm.|
|Stroke :||3.0 in | 76 mm.|
What is a 1984 Fiero worth?
Data based on 40 auction sales. note: The images shown are representations of the 1984 Pontiac Fiero and not necessarily vehicles that have been bought or sold at auction….Pontiac Models.
How much horsepower does a Fiero GT have?
|Engine type||V6, 12v|
|Displacement||2.8 l (173 ci / 2837 cc)|
|Power||142 ps (140 bhp / 104 kw)|
|Torque||230 Nm (170 lb-ft)|
|Power / liter||50 ps (49 hp)|
How much does a 86 Fiero GT weigh?
|Length||1984–1986: 4,072 mm (160.3 in) 1987–1988: 4,144 mm (163.1 in) 1987–1988 GT: 4,193 mm (165.1 in)|
|Width||1984–1986: 1,750 mm (68.9 in) 1987–1988: 1,753 mm (69.0 in)|
|Height||1,191 mm (46.9 in)|
|Curb weight||1,116 to 1,265 kg (2,460 to 2,789 lb)|
Is V8 Archie still in business?
Mike= As many of you know, V8 Archie is relocating to Las Vegas and into semi-retirement. Archie has been in the Fiero community for over 30 years. We encourage your contributions to show your appreciation for all Archie has done for our club as well as our Fiero community. …
Why did Pontiac Fieros catch on fire?
According to an article from the Los Angeles Times about the investigation of the Pontiac Fiero engine fires, the fires were caused by oil leaking into the engine and combusting as the engine heated up. The company finally issued a mass recall of all Pontiac Fiero models in 1987, but the damage had already been done.